Detailed Product Description

wood effect machine
wood effect machine is used for aluminum profile/sheet for
wood effect decoration. It is composed with four tables that can be customized
for both profile and both sheet. The tables are in front of both sides of the
infiltration oven. There are two mutually independent vacuuming and control system,
which enable the two tables work alternatively for higher efficiency. Each frame
is made out of two hinged parts holding each a membrane is laid on a movable
trolley of each table. Lay the transfer paper on the lower membrane once it opened,
put the working pieces on the transfer paper, it will be closed when another
transfer paper laid on the working pieces. A pump will create a vacuum in between
the two membranes, which makes a perfect adherence of the transfer paper on
the surface of the working piece.
The frame will be pushed in to the infiltration oven automatically after the vacuum
process is finished. Where it will stay for 3 to 7 minutes till the temperature
reach up to 180°C. This will make it possible for the pigment inks transfer from the paper into the coating layer. The transfer process is finished as the frame come out of the oven automatically with an excellent quality result and a remarkable reduction of the production cost. This model is patented and technologically advanced.

Features and specifications:
1). System configuration: Double system (Four tables) PLC automatic
2). Annual Capacity: 1800 tons of aluminium profiles or 480,000 pieces sheets
3). Power: 18.23KW
4). Heating Resource: diesel oil
5). Machine Overall Size (L x W x H): 26x2.5x4.2m
6). Working Table Size (L x W): 7x1.5m
7). Land required (L x W x H): 26x6x5m
8). Labor required (persons): 4-5
9). Vacuuming system: 2 sets hydraulic
10). Combustion system: Riello
11). Working table(for profile or sheet metal): 4 sets
12). Working table auto-overturn device: 2 set
13). Waste exhausting and security system: 2 sets
14). Heat preservation device: 2 sets
15) Auto moving and security device: 2 sets

Remark:
The annual capacity is based on the profile of thickness=1.2mm, section=40x40mm,
length=6m; or sheet metal of 2000x1000x0.8mm
Gas, LPG, Gasol or electricity heating system is available too.